Jlk710/12+18+24 Rigid Frame Stranding Machine

2.1 The machine is driven by 36 variable steps drive gear-box, with dual active, dual hauling capstan, its haul force is so strong that can reach to 15T. Natural wire distribution for preventing abrasion damage of wire cores when stranding. Wire pay-off tension is controlled pneumatically to guarantee constant tension in full loaded bobbin or empty bobbin. With automatic emergency stop device, in case of wire break the device can control directly every pay-off bobbin in the cage and the entire machine will automatically stop at once.
2.2The machine can stranding the copper wire of 630 mm² Above 90% compressed intensity rate, which can meet the requirement of big across-area XLPE cable.
2.3 Driven by DC motor, the imported PLC and touch screen (Siemens or PRO-face), which is convenient for the operator to set and display the parameter on the touch screen.

3.1Stranding single round wire area
6~30mm2
3.2Max stranding outside diameter
45mm
3.3Max Rotating speed of cages
Max. 145rpm- 12B (total 6 steps)
3.4Stranding pitch
38 ~1030mm
3.5Liner speed
6~44m/min
3.6Power of main motor
185 KW
3.7Pay-off bobbin in the cage.

PND710 (hole 125mm)_Buyer provide bobbin drawing
3.8Capstan wheel size
Φ 2500mm
3.9Center pay-off reel
PN800-1600
3.10Take-up reel
PN1600~PN3150
3.11Total power of the equipment
220kw
3.12Total length of the equipment
46m
3.13Center height of the line
1100mm.